G-Cam/E3

With the E3 plugin, you can use all IP cameras from G-Cam/E3 with the described functionality with the G-Core software.

The following functions are available:

  • H.264, MJPEG, H.264ShortGop support
  • Support of digital inputs and outputs
  • Support of audio inputs Line-In and Microphon
  • Support the camera-side motion detection
  • Support the camera-side tampering detection
  • Single/Dual Streaming
  • Dynamic Stream Selection (DSS)
  • PTZ functions of speed dome cameras
  • Support of encrypted communication via HTTPS for controlling functions such as PTZ and quality control for the complete E3 lineup.
  • Support of encrypted communication of Video and Audio-Stream via HTTPS for all E3-Cameras using Firmware with ending NSZ (included since Firmware gb20160530NSZ). These are 4K-Cameras, Hemispheric-Camera and coming soon types of Speed-Domes.
  • Support of GCore-Feature “Secondary channel”
  • Support of AAC

Installation

The plugin consists of two files: E3IPC.dll and E3IPC.dlg.dll.

If the plugin is not included in the scope of installation with delivery, please copy both files (E3IPC.dll and E3IPC.dlg.dll) to the plugin directory of G-Core (C:\Program Files\Geutebrueck\GCore\MediaPlugins).

The G-Core server service must then be restarted.

Add the Plugin

  1. In G-Set, open the Hardware selection menu.

  2. Right-click on the list view and in the pop-up menu select Add.

  3. In the following pop-up, select the IP-Camera Plugin <G-Cam/E3 IPC> by selecting it and clicking Add.

  4. The G-Cam/E3 IP plugin is now entered in the hardware module list as a hardware resource.

  5. Now select the plugin in the list and make the necessary changes to the settings.

PTZ Functionality

To control speed dome cameras you must enable Telecontrol Camera in G-Set.

It is then possible to control the camera using the virtual joystick in G-View or the MBeg operating device.

Also refer to the section Supported Actions.