Supported Actions
The following actions are supported:
PTZ Action
In addition to the corresponding actions for pan, tilt and zoom, the following actions are also supported:
|
Name |
Description |
|---|---|
|
AutoFocusOff |
Deactivate autofocus. |
|
AutoFocusOn |
Activate autofocus. |
|
FocusFar FocusNear FocusStop |
If autofocus has been deactivated using AutoFocusOff, manual control of the focus is possible using these actions. |
|
CameraAreaZoom |
Support of Area Zoom and one click positioning. |
|
Move to default position Move to preset position Move to absolute position Move to relative position and Camera absolute position Save default position Save preset position Clear default position and Clear present position |
The corresponding action is performed. |
Day-Night
|
Name |
Description |
|---|---|
|
Camera Day Night Mode |
With this action, you can change the camera to the corresponding mode at any time. The available modes are Day , Night or Automatic, which means switching is performed automatically by the camera. |
|
Camera Light On and Camera Light Off |
Here the IR Cut Filter of the camera can be controlled. |
Camera Raw
|
Name |
Description |
|---|---|
|
Camera Raw Output |
Using the Camera Raw Output action, it is possible to send any command to the camera at any time. This also makes it possible to set values in the camera that were not previously set. For further information or if you require this feature, please contact customer service. |
Digital Inputs and Outputs
|
Name |
Description |
|---|---|
|
Digital inputs and outputs |
To control the digital output of the camera, use the action Set Digital Output with appropriate values. If the plugin has identified a status change for the digital input of the camera, the Digital Input action can be seen in the GCore server. |