G-Cam/E4

With the E4 plugin you can use all IP cameras from G-Cam/E4 with the described functionality with the G-Core software.

The following functions are available:

  • H.265, H.265CCTV, H.264, H.264CCTV, MJPEG support
  • Support of digital inputs and outputs
  • Support of audio inputs Line-In and Microphon
  • Support of the camera-side motion detection
  • Support of the camera-side tampering detection
  • Single/Dual Streaming
  • Dynamic Stream Selection (DSS)
  • PTZ functions of speed dome cameras
  • Support of encrypted communication via HTTPS for controlling functions such as PTZ and quality control for the complete E4 lineup
  • Support of encrypted communication of Video and Audio-Stream via HTTPS for all E4-Cameras.
  • Support of GCore-Feature “Secondary channel”
  • Support of AAC

Installation

The plugin consists of two files: E4IPC.dll and E4IPC.dlg.dll.

If the plugin is not included in the scope of installation with delivery, please copy both files (E4IPC.dll and E4IPC.dlg.dll) to the plugin directory of G-Scope C:\Program Files\Geutebrueck\GCore\MediaPlugins.

The G-Core server service must then be restarted.

Add the Plugin

  1. In G-Set, open the Hardware selection menu.

  2. Right-click on the list view.

    → The context menu appears.

  3. Click Add.

  4. To select the IP-Camera Plugin <G-Cam/E4 IPC>, click the plugin first and then click Add.

    → The G-Cam/E4 IP plugin is now entered in the hardware module list as a hardware resource.

  5. To make necessary changes to the settings, select the plugin in the list.

PTZ Functionality

To control speed dome cameras, you must enable Telecontrol Camera in G-Set.

It is then possible to control the camera using the virtual joystick in G-View or the MBeg operating device.

Also refer to the section Supported Actions.