Samsung

Subject to license

With this plugin, Samsung IP cameras can now be used in M-JPEG mode.

The development was based on the several documents provided by Samsung:

  • “CGI Specification for IP Surveillance Products, SIS Division”, version 2.8, 2010-09-04

  • “Samsung Network Camera SDK, HTTP API Development Guide”, revision 1.71.5, 2010-09-02

  • “SAMSUNG NETWORK CAMERA SDK, RTSP API Development Guide”, version 1.4, 2010-05-14

According to the specification, the following cameras are supported: SNC-570, SND-560, SND460V, SNC-550, SNP-1000/1000A, SNP-3300/3300A, SNS-100/400, SNC-1300, SNP-3750/3350, SNP-3370/3370TH, SNP-3301/3301H.

The first implementation was extended to support a second line of cameras according to the second specification. The following cameras should be supported by the new release: SNC-B2315, SNC-B5395, SNC-M300, SNC-C6225, SNC-C7225, SNC-C7478, SNC-C7478C, SNC-B2331, SNC-B5368, SNC-B2335, SNC-B5399, SNB-2000, SND-3080, SNB-3000, SNV-3080, SNB-5000, SND-5080, SND-5080F, SNV-5080, SNB-5000TJ, SNV-3120, SNP-3120, SNP-3120V, SNP-3120VH, SNB-1000, SND-1010, SPE-100, SNV-5010, SNP-3430H.

Note that the plugin was tested only with SND-460V, SNV-3080, SNV-5080, SNV-5010, SNP-3371 and SNP-6320RH.

Installation

The plugin is not installed by default with the G-Core software.

If the plugin is not included in the scope of installation with delivery, run the installer again and select the Samsung Plugin within the installer.

To initialize the plugin, you must reboot the G-Core server.

Add the Plugin

  1. In G-Set, open the Hardware selection menu.

  2. Right-click on the list view and in the pop-up menu select Add.

  3. In the following pop-up, select the IP-Camera Plugin <Samsung IPC> by selecting it and clicking Add.

    → The Samsung plugin is now entered in the hardware module list as a hardware resource.

  4. Now select the plugin in the list and make the necessary changes to the settings.