BBV System

The commands of the BBV system are not compatible with the commands of the KDec system. Complete conversion is necessary. This procedure is described in the following table.

In the same way as with KDec, BBV pan/ tilt heads can be controlled with faster and slower speed stages (MBeg). When using MBeg/VS, the 16 speed stages of the BBV system are used for speed-dependent control with joystick. Up to 16 pan/ tilt heads can be controlled per BBV system. The BBV system manages up to 16 preset positions per pan/ tilt head.

Number of preset positions: 16 including home position (home position is preset 1)

Number of possible camera numbers: 1 ...16

Meaning of variables:
• kkk = Enter number of dome camera, with leading zeroes if necessary
• pp = Enter preset position of selected dome camera, with leading zeroes if necessary
• vvv = Additional variable speed parameters

BBV function	KDec command	MBeg	MBeg/VS
Pan right	SNkkkS-	Key (stop = release) at currently set speed (normal/ fast)	with joystick
Pan left	SNkkkS+
Tilt down	SNkkkN-
Tilt up	SNkkkN+
Tilt up/down, pan right/left at variable speed	SNkkk++	Press and hold key	Automatic with joystick
Tilt up/down, pan right/left at normal speed	SNkkk--	Release key
Focus near (manual mode)	SNkkkF-	Focus near
Focus far (manual mode)	SNkkkF+	Focus far
Zoom wide	SNkkkZ-	Zoom wide
Zoom tele	SNkkkZ+	Zoom tele
Iris open (manual mode)	SNkkkB-	Iris open
Iris close (manual mode)	SNkkkB+	Iris close
Store preset or home position	PPkkk.pp	Program preset (1 – 16) Home position = 1
Go to preset	SNkkk.pp	Go to preset (1 – 16)
Go to home position	SNkkk.Gp	Press key
Auto iris on	SNkkkK0	Camera off
Wiper on/off	SNkkkW1SNkkkW0	Press key
Light on	SNkkkL1	Light on
Light off	SNkkkL0	Light off
Automatic pan	SNkkkSA	Automatic pan
Pump on/off	SNkkkP1SNkkkP0	Wash on/ off