JVC Dome TK-C676

The commands of TK-C676 dome systems are not compatible with the commands of the KDec system. A complete conversion must take place. This is described in the following figure table.

Number of fixed positions: 38 incl. home position (home position is fixed position 40)

Available camera numbers: 1...32

Meaning of variables:
• kkk = Number of the dome camera to use, when appropriate, with leading zeros.
• pp = Fixed position of the selected dome camera, possibly with leading zeros.
• vvv = Additional variable speed parameters.

TK-C676 function

KDec command

MBeg

MBeg/VS

Pan right

SNkkkS-

With buttons (stop = release)

With the joystick

Pan left

SNkkkS+

Tilt downwards

SNkkkN-

Tilt upwards

SNkkkN+

Pan and tilt at high speed

SNkkk++

Hold button

Automatically via joystick

Pan and tilt at normal speed

SNkkk--

Release button

Automatically via joystick

Focus near

SNkkkF-

With the button

With Focus rocker switch

Focus far

SNkkkF+

With the button

Focus stop

SNkkkF0

Release /

Release focus

Zoom wide

SNkkkZ-

With the button

With Zoom rocker switch

Zoom tele

SNkkkZ+

With the button

Zoom stop

SNkkkZ0

Release /

Release zoom

Open iris. The dome is then in manual iris mode

SNkkkB-

Hold button (stop = release)

Close iris. The dome is then in manual iris mode

SNkkkB+

Hold button (stop = release)

Save fixed position or home position

PPkkk.pp 

Program fixed position (0 - 39), home position = 40)

Move to a fixed position

SNkkk.pp

Move to fixed position (0 - 39).

Move to home position

SNkkk.GP

Press button

Start tour 0; the tour spots corresponds to the first 8 fixed positions

SNkkkL1

Press button

Stop tour 0

SNkkkL0

Press button

Activate auto focus and auto iris operating modes

SNkkkW1

Press button

Switch autoflip mode on/off

SNkkkP1

Press button

Switch VarPan on/off (adjust pan speed to zoom)

SNkkkX1

Press X button (toggle = press again)

Stop all movements, show the firmware vers. On

SNkkkY1

Hold Y button

Display the firmware vers. Off

SNkkkY0

Release Y button

Set starting position for automatic panning

PPkkk.38

Save fixed position 38

Set return position for automatic panning

PPkkk.39

Save fixed position 39

Set automatic panning between two positions

Send SNkkkSA once send SNkkkSA second time send SNkkkSA third time send SNkkkSA fourth time

Press button once

Automatic panning in clockwise direction

 

Press button second time

Automatic panning in counterclockwise direction

 

Press button third time

Stop automatic panning

 

Press button fourth time

Advanced TK-C676 Commands

(Menu Commands, see camera manual)

TK-C676 function

KDec command

MBeg

Menu on/off

SNkkkK1

Set

SNkkkK0

JVC Dome TK-C675/C676-m

Except for the quick focus/ zoom speed, TK-C675/C676-m is identical to TK-C675/C676. The configuration menu of the dome can now be additionally activated with the command 'Func-V ON' and the Set function can be sent with the command 'Func-V OFF'.