Panasonic Dome WV-CSR/BSR Series

The commands of Panasonic dome systems are not compatible with the commands of the KDec system. A complete conversion must take place. This is described in the following table of figures. Conversion is performed on the basis of protocol documentation version 5.3 from 27 November 1997 for WV-CSR-600, WV-CSR400 and WV-BSR300.

See also Panasonic Domes WV-CS850/854E/CS600/CS650

Number of fixed positions: 40 incl. home position (home position is fixed position 1)

Available camera numbers: 1...92 (32 participants physically possible on the RS485 bus)

Meaning of variables:
• kkk = number of the dome camera to use, when appropriate, with leading zeros
• pp = fixed position of the selected dome camera, possibly with leading zeros
• vvv = additional variable speed parameters

Panasonic function	KDec command	MBeg	MBeg/VS
Pan right	SNkkkS-	With buttons (stop = release)	With the joystick
Pan left	SNkkkS+
Tilt downwards	SNkkkN-
Tilt upwards	SNkkkN+
Tilt up/down, Pan right/left with variable speed	SNkkk++	Hold button	Automatically via joystick
Tilt up/down, Pan right/left with normal speed	SNkkk--	Release button	Automatically via joystick
Focus near	SNkkkF-	With the button	With Focus rocker switch
Focus far	SNkkkF+	With the button
Focus stop	SNkkkF0	Release /	Release focus
Zoom wide	SNkkkZ-	With the button	With Zoom rocker switch
Zoom tele	SNkkkZ+	With the button
Zoom stop	SNkkkZ0	Release /	Release zoom
Save fixed position or home position	PPkkk.pp	Program fixed position (1 - 40), home position = 1
Move to a fixed position	SNkkk.pp	Move to fixed position (1-40).
Move to home position	SNkkkGP	Press button