Recherche d’interfaces

GeViSoft Interface - ABI Alarm System MC1500

Functionalities:

• Allows the use of ABI detectors as an I/O system in GeViSoft.

• Specifier Text
  GeViSoft Interface - ABI Alarm System
  MC1500
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and the
  ABI alarm system MC1500.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Integration passes all actions from door units across the system and distributes them to specific servers in those locations.
Thus, metadata events from each door are added to the camera.

MultiScope III Interface - ADACS Management System (atomic power plant, UK)

Functionalities:

• A central computer posts alarm messages over TCP/Serial redirectors to multiple recordings.

• Specifier Text
  MultiScope III Interface - ADACS
  Management System
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the ADACS management system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

This integration to our G-Core system was invented by the company VMA d.o.o. For further information about this integration please get in contact with the VMA d.o.o. sales partner.

AgentVi savVi is a software for intelligent analysis of video sequences. The following events can be detected:

•     Loitering - A person is loitering in a monitored area.
•     Person crossing a line - A person crosses a defined line.
•     Person moving in area - A person is moving in a monitored area.
•     Vehicle crossing a line - A vehicle crosses a defined line
•     Vehicle moving in area - A vehicle moves in a monitored area
•     Person tailgating - One person follows another too closely
•     Vehicle tailgating - A vehicle tailgates too close to another vehicle
•     Asset protection - An monitored object is removed
•     Crowding - A persons congestion forms in a monitored area
•     Occupancy - A watched area is occupied
•     Suspcious objects - An object has been left in a monitored area
•     Stopped vehicle - A vehicle has stopped
•     People counting
•     Vehicle counting
•     Speed analysis - Vehicle speed determination
•     Video quality monitoring - influencing a camera by concealing or twisting it.

Detected events are transmitted to G-Core via this interface.

• Specifier Text
  G-Link interface to the intelligent video analysis tool AgentVi savVi. Detection of static and moving objects, persons and vehicles. Counting of persons and vehicles and determination of their speed. Detection of influences of the cameras by e.g. covering or twisting.
• Caractéristiques techniques
  G-Link v2.18.10.640 with AgentVi savVi Driver v2.3.0.9
  .Net Framework v4.6.2
  Test with AgentVi savVi Manager 5.3.0.217
• Télécharger le fichier (PDF, 1934 KB)

AGORA SMS is a unified platform that integrates different security systems from different vendors adding procedures and auditing tools. Our software allows you to increase productivity in your organisation by implementing procedures, allowing the operator to control every equipment, on-site guards and vehicles, from the same platform. With AGORA, you’ll also be able to audit and analyse the entire operation.

• Télécharger le fichier (PDF, 258 KB)

Upon an intercomcall the corresponding camera is shown on the spot screen. When an activity detection movement had been detected, a prerecorded message will be played followed by a connection with the guard station.

GeViScope, re_porter interface - Alwin (Security Management Software) Founded in 1995, Alcea is a French designer and manufacturer of security and supervision systems for buildings: access control, intrusion, video- surveillance, key management and technical management.

From hypervision software to multifunction badges, Alcea designs open, modular and integrated soft and hardware solutions to manage all issues concerning security and supervision for building. From France and Qatar, Alcea solutions are installed and distributed in over 15 countries worldwide. Alcea works with government and service, as the Council of the European Union and the T1 Tower (Paris-La Défense), and also operates in the sectors of transport, telecommunications or culture: Air France, SNCF, SFR, France Televisions.

Alcea provides support and operational added value at every stage: from the research and design to the final installation of your security system, and beyond.

Functionalities:

• Interface handling, identification of available cameras
• Sending a CustomAction from Alwin to GeViScope/re_porter
• Display of live and recorded video (related to alarms from Alwin) completely integrated into the Alwin GUI.
• Requirement: System time of GeViScope/re_porter and Alwin PC has to be synchronized, as the playback of recorded video will be carried out via PlayFromTime

• Specifier Text
  GeViScope, re_porter interface -
  Alwin (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the Alcea system Alwin
  (Security Management Software)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 256 KB)

G-Link software option for the integration of the Facility Management System manufactured by AMAG. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Symmetry server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK. 

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/AMAGSymmetry
  
  G-Link software option for the integration of the
  Security Management System manufactured by
  AMAG.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Symmetry
  Server.
  Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/AMAGSymmetry
  Brand: Geutebrück or equivalent
• Télécharger le fichier (PDF, 616 KB)

APMS is software which can recognize NPR and store each number plate in database and picture with recognition. User can view all over web page and make some statistics regarding entry/exit, occupancy public or vip parking. System can put NPR to the database automaticali or manualy and there can be define a lot of groups.

For more information please contact Apollo-Security.

For more information please contact Apollo-Security.

Security Integration Software for commercial facilities (ClubLink) and correctional institutions (Intelli-link).

Functionalities:

• Graphical user interface provides a single intuitive point of control for a wide array of security products.
• Control of digital and analogue video systems.
• Innovative alarm management and display.
• Customised control room solutions.
• Integration with a wide array of security products and vendors, including Video, Access Control, Alarms, Mobile Duress, and Intercoms.
• Distributed architecture allows for integration of small or very large scale installations.
• Integration with GeViScope, re_porter, GscView, VS-40, VS-30 and GeViSoft.

• Specifier Text
  GeViScope, re_porter, GeviSoft, VS-40,
  VS-30 interface – Intelli-link und ClubLink
  (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture recording
  systems GeViScope, re_porter, GeviSoft, VS-40,
  VS-30 and the ARA Security Services system
  Intelli-link und ClubLink (Security Management
  Software)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Security Integration Software for commercial facilities (ClubLink) and correctional institutions (Intelli-link).

Functionalities:

• Graphical user interface provides a single intuitive point of control for a wide array of security products.
• Control of digital and analogue video systems.
• Innovative alarm management and display.
• Customised control room solutions.
• Integration with a wide array of security products and vendors, including Video, Access Control, Alarms, Mobile Duress, and Intercoms.
• Distributed architecture allows for integration of small or very large scale installations.
• Integration with GeViScope, re_porter, GscView, VS-40, VS-30 and GeViSoft.

Communication module to exchange information between Argus system and G-Core recorders, with remote control for G-View and/or G-sim.

Seamless integration of live and recorded video in the graphical user interface
Exchanging alarm information (sync signal lost, motion detection, start/stop of event recordings, …)
Displaying belonging video of an alarm handled by the third party system
Acquiring Number Plate Recognition data
Remote control of G-view and/or G-sim

Integration of GEUTEBRÜCK systems (GeViScope, re_porter etc.) with the ASM (Alarm System Management) of ARIGON PLUS from VOMATEC International GmbH

Functionalities:

• Fully integrated display of live video and recorded archives within the ARIGON^® PLUS GUI
• Video archive “search and jump” by date and time
• Control and monitoring of events and alarms from the GEUTEBRÜCK system from within ARIGON^® PLUS
• Display and processing within ARIGON^® PLUS of alarms from the GEUTEBRÜCK system
• Automated responses to GEUTEBRÜCK system events
• Video Camera control (position/tilt/zoom, focus, day/night mode)
• Monitoring, control, processing, and display of GEUTEBRÜCK system digital inputs and outputs within ARIGON^® PLUS
• Automated switching of the ARIGON^® PLUS camera display in reaction to alarms or events from any external system interfaced to ARIGON^® PLUS (including GEUTEBRÜCK systems)
• Video Wall

ARIGON^® PLUS is a fully integrated workflow controlled safety and administration management system.

ARIGON^® PLUS is a modular system that can be configured to meet the customer’s specific requirements.

ARIGON^® PLUS integrates functionality from multiple fields into a single, unified control system :

• Video
• Alarm System Management
• Building Management System
• Communications
• Emergency Services Management
• Situation Center
• Administration (Personnel, Material, etc.)

• Specifier Text
  GeViScope, re_porter interface –
  ARIGON PLUS GMS (Alarm Management System)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the ARIGON PLUS GMS system
  Alarm Management System.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, MultiScope III Interface - Ascom De La Rue (automated teller machines, ATM)

Functionalities:

• Serial connection of automated teller machines via MultiCom.

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  Ascom De La Rue (automated teller machines, ATM)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and Ascom De La Rue
  (automated teller machines, ATM).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the maritime Video Surveillance System manufactured by Automatic Sea Vision. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Camera. Maximum quantity available: 64 Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/ASVChannel
  
  G-Link software option for the integration of the
  maritime Video Surveillance System manufactured by
  Automatic Sea Vision.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Camera.
  Maximum quantity available: 64
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/ASVChannel
  Brand: Geutebrück or equivalent

GeViScope, re_porter, MultiScope III Interface - Autec BABYLON-XMP (access control, time management, house & building)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Individual picture export.
• Export of event-controlled video recordings in GBF (Geutebrück Bild [Picture] Format) or in MPEG-4 format.
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.
• PTZ control (Pan-Tilt-Zoom).

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  Autec BABYLON-XMP (access control, time management,
  house & building)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and the Autec system BABYLON-XMP.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1587 KB)

GeViScope, re_porter interface - AVIT (Media control)

Functionalities:

• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• PTZ control (Pan-Tilt-Zoom).

• Specifier Text
  GeViScope, re_porter interface -
  AVIT (Media control)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the COMM-TEC system AVIT.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Stream video integration.

GeViScope, re_porter, MultiScope III Interface - AXxess NS (Access Control Systems)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• Individual picture export.
• Export of event-controlled video recordings in GBF (Geutebrück Bild [Picture] Format) or in MPEG-4 format.
• PTZ control (Pan-Tilt-Zoom).

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  AXxess NS (Access Control Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and the MAXXESS system AXxess NS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Access Control System manufactured by Maxess. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Maxxess Axxis Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.


Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/MaxessServer
  
  G-Link software option for the integration of the
  Access Control System manufactured by Maxess.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Maxxess
  Axxis Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/MaxessServer
  Brand: Geutebrück or equivalent

This integration to our G-Core system was invented by the company AUTEC. For further information about this integration please get in contact with the AUTEC sales partner.

BriefCam is seamlessly integrated with Geutebrück VMS:

On-demand: BriefCam can quickly and efficiently fetch recorded video directly from Geutebrück’s servers using the MIPS SDK.  After an initial setup, the user is presented with the list of licensed cameras in which the user can select any number of cameras from which video will be fetched. After selecting the desired time period, the Geutebrück plug-in copies the video from the Geutebrück server to the BriefCam server and begins processing.


Real-time: For real-time video processing applications, BriefCam can receive a continuous real-time video stream from the MIPS SDK. In this scenario, BriefCam processes and anlyzes the video on-the-fly and generates alerts that match pre-set rules and conditions. In this case, the video is not saved locally on BriefCam’s server, only objects that match the rule conditions.

• Télécharger le fichier (PDF, 260 KB)

GeViScope, re_porter interface - BSW (Physical Protection System)

Functionalities:

• Seamless integration of live and recorded video in our user interface
• Manual (by operator) and automatic (based on events in BSW) recording trigger
• Receiving events from GeViScope and using them inside BSW
• Viewing multiple video streams in the user interface (up to 25)
• Searching recorded video by date/time

• Specifier Text
  GeViScope, re_porter interface -
  BSW (Physical Protection System)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Bezopasnost system BSW.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 447 KB)

GeViSoft Interface (GST) - Cassys, D & D Software Elektronik GmbH (online system for casinos)

• Specifier Text
  GeViSoft Interface (GST) - Cassys,
  D & D Software Elektronik GmbH
  (online system for casinos)
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the online system Cassys for
  casinos (D & D Software Elektronik GmbH).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Facility Management System manufactured by Software House. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each CCURE9000 server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK. 

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/CCure/9000-2.6
  
  G-Link software option for the integration of the
  Security Management System manufactured by
  Software House.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Ccure
  Server.
  Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/CCure9000-2.6
  Brand: Geutebrück or equivalent
• Télécharger le fichier (PDF, 581 KB)

G-Link software option for the integration of the Video Management System manufactured by Chess Dynamics. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each IBSS Server. Maximum quantity available: 8
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/ChessDynamics
  
  G-Link software option for the integration of the
  Video Management System manufactured by Chess
  Dynamics.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each IBSS
  Server. Maximum quantity available: 8
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/ChessDynamics
  Brand: Geutebrück or equivalent

GeViSoft Interface - CIAS Elettronica Srl (Microwave intruder detection)

• Specifier Text
  GeViSoft Interface - CIAS Elettronica Srl
  (Microwave intruder detection)
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the microwave intruder detection (CIAS Elettronica Srl).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Perimeter Control System manufactured by CIAS. This option realizes the direct communication between the systems connected to the G-Link Server. The option enables the connection of 128 IB Devices. Maximum quantity available: 48
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/CIASIBServer
  
  G-Link software option for the integration of the
  Perimeter Control System manufactured by CIAS.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option enables the connection of 128
  IB Devices. Maximum quantity available: 48
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/CIASIBServer
  Brand: Geutebrück or equivalent

During the money processing or picking, data captured by the user or the system is displayed in the video image.

MultiScope III Interface - CitySnc (number plate recognition)

Functionalities:

• MSC3 serial connection via MultiCom.

• Specifier Text
  MultiScope III Interface - CitySnc
  (number plate recognition)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the number plate recognition CitySnc.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, MultiScope III Interface - CMS Cash Count (Management) System

Functionalities:

• Video surveillance of cash counting processes
• Storage of cash management data of the counting process
• Database playback and presentation of data of the process by GscView, MultiView

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  CMS Cash Count (Management) System
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter, MultiScope III
  and the CMS Cash Count (Management) System.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter Interface - CMS (Cash Management Systems)

CMS Cash Management Systeme GmbH and GEUTEBRÜCK GmbH developed a solution which combines cash management and video surveillance. The CMS video module is directly connected to CMS Cash-Control32 or CMS Single Master. The fast and efficient evaluation of the video recording provides a safe money handling at any time.

Advantages:
Processes get more transparent Unique classification of counting data and video pictures Relevant video pictures are available within seconds Clear relief of staff

Functionalities:

• Video based documentation of cash handling processes
• CMS-System sends corresponding Cash Management-Actions during counting process
• Research in GscView
• Special GscView-Data-Filter-Dialog for retrieving video sequences belonging to SafeBags via safe bag-No.

• Specifier Text
  GeViScope, re_porter Interface -
  CMS (Cash Management Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the CMS Cash Count (Management) System.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

MultiScope III Interface - Complus Teltronic (intercom system)

• Specifier Text
  MultiScope III Interface - Complus Teltronic
  (intercom system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the intercom system Complus Teltronic.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, MultiScope III interface - ComVIDEO (Intercom System)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.

• Specifier Text
  GeViScope, re_porter, MultiScope III interface -
  ComVIDEO (Intercom System)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and the Commend system COMWIN.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - Counting eXperience (Cash Count Systems)

Functionalities:

• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).

• Specifier Text
  GeViScope, re_porter interface -
  Counting eXperience (Cash Count Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the IT-experience system Counting Experience.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope Interface - Crestron (house & building management system)

Functionalities:

• Control of GeViScope via Crestron operator panel
• GeViScope Action Mapping via TCP/IP
• Display of GEUTEBRÜCK Live Video Streams on Crestron panels
• PTZ control (Pan-Tilt-Zoom) (projected)
• Calling up preset positions (projected)
• Calling up preset positions due to alarms arriving in the Crestron system (projected)

• Specifier Text
  GeViScope Interface - Crestron
  (house & building management system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  video system platform GeViScope and
  the Crestron house & building management
  system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - Datalog 4 (Security Management Software)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.

• Specifier Text
  GeViScope, re_porter interface -
  Datalog 4 (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Cortech Developments system Datalog 4.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Amadeus 5 is an on-line access control and alarm monitoring system.

This GeViScope/re_porter interface for Amadeus 5 offers the following benefits to the end user:

• Seamless integration of live and recorded video in the graphical user interface of Amadeus 5
• Displaying belonging video of an alarm handled by Amadeus 5

Amadeus 5 offers sophisticated access control and alarm management solutions for all size installations and levels of complexity. Amadeus 5 is probably the most advanced on-line security software on the market today that is still the simplest to use.

The huge system capacity enables an unlimited number of cardholders, controllers, readers, supervised alarms, outputs, video servers, operators, access groups and security levels. Amadeus 5 seamlessly monitors lift, parking, guard tours, time & attendance, multiple client workstations applications, as well as video and biometric integrations. The Amadeus 5 software can be shared by several entities located in the same building and offers a solution for international companies with offices spread all over the world.

The powerful communication environment allows redundant communication, alarm event mode, communication encryption and reflexes for emergency and routine operations, through different networks like RS485, TCP/IP, etc.

Amadeus 5 efficiency and security is based on database mirroring, redundancy DB architecture, data archival and back-up and bi-directional data exchange. The distributed architecture of the single integrated relational database allows for central monitoring and control.

The user-friendly software is easy to configure and use with predefined parameters for fast installation, automatic actions and reflexes as well as personalized report wizard. Full information on real time alarms and events is provided on the active alarm window, event log, diagnostic screens and live interactive graphical maps.

• Unlimited number of cardholders, doors, controllers, readers, supervised alarm inputs, door lock outputs, access groups, security levels, operators, etc.
• Advanced report wizard
• Time and attendance report
• Integrated badge printing
• Real time cardholder ID photo capture     
• Built-in default settings for quick setup
• Advanced features: crisis level, escort, interlock, counter, action and process control, site maps with real time animated icons, alarm priority levels, etc. 
• Operating system/compatibility: Windows7/Windows 2000/XP/Vista
• On line remote site: LAN/WAN, dial up modems
• DB engines: MS-Access, SQL 2000/2005
• Cardholder database import: ODBC compliant (Access, Excel, etc.)
• Alarm event mode
• Communication encryption
• Global reflex with or without PC
• Anti-passback with or without P
• Built-in finger print support
• Translation tool for software
• Web Interface

• Specifier Text
  GeViScope, re_porter interface – DDS Amadeus 5
  (Access control and alarm monitoring system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the DDS system Amadeus 5
  (Access control and alarm monitoring system)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 682 KB)

G-Link software option for the integration of the Video Management System by Dedicated Micros. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Dedicated Micros NVR/DVR. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/DedicatedMicros
  
  G-Link software option for the integration of the
  Video Management System by Dedicated Micros.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Dedicated
  Micros NVR/DVR. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/DedicatedMicros
  Brand: Geutebrück or equivalent

G-Core/DMTRadarClient is a Windows service that connects a DMT radar client to a G-Scope. At launch, the positions of the radar sensors are determined. During operation, the service regularly polls the radar client. In case of an alarm, the radar client provides type, direction, speed and current position of the object that triggered the alarm. The service calculates which sensors are closest to the object and sends all data to G-Core. This allows an alarm scene to be displayed in G-View or G-Sim which contains the images of the two cameras closest to the object when a camera is mounted on each radar sensor.

• Specifier Text
  G-Core/DMTRadarClient is a Windows service to connect a radar system manufactured by DMT Radar & Security Systems with Geutebrueck GmbH manufactured G-Scope. Alarms raised by the radar system when objects enter a defined zone are processed by the service and forwarded to G-Core. The service calculates the two cameras positioned closest to the object. This enables G-View or G-SIM to display an alarm scene containing the most interesting two camera streams. Object data can be stored in the G-Core database to search for alarm related incidents offline.
• Caractéristiques techniques
  G-Core/DMTRadarClient is implemented as a Windows service and runs under Windows 8.1 or higher. It requires Microsoft Net Framework 4.6.1 and Visual C Redistributable Version 2015 and can be installed on any computer in the network.
  A G-Core/DMTRadarClient option is required.
• Télécharger le fichier (PDF, 701 KB)

G-Link software option for the integration of the Facility Protection System manufactured by Digital Security Controls. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each DSC Alarm Panel. Maximum quantity available: 1000
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/DSCAlarmPanel
  
  G-Link software option for the integration of the
  Facility Protection System manufactured by Digital
  Security Controls.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each DSC Alarm
  Panel. Maximum quantity available: 1000
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/DSCAlarmPanel
  Brand: Geutebrück or equivalent

GeViScope, re_porter, MultiScope III Interface - EBÜS (BHE standard)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• External event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.
• PTZ control (Pan-Tilt-Zoom)

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  EBÜS (BHE standard)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  EBÜS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (JPG, 753 KB)

G-Core Interface - EBÜS (BHE standard) 

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• External event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.
• PTZ control (Pan-Tilt-Zoom)

GeViSoft Interface - effeff (alarm management system)

• Specifier Text
  GeViSoft Interface - effeff
  (alarm management system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the effeff alarm management system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

When an RFID tagged asset moves through a checkpoint, 2 RFID readers, an alert is sent to the VMS which alerts security via a video feed that an asset is being removed from the area without permission.

This integration to our G-Core system was invented by the company Scheidt & Bachmann GmbH. For further information about this integration please get in contact with the Scheidt & Bachmann GmbH sales partner.

This integration to our G-Core system was invented by the company Scheidt & Bachmann GmbH. For further information about this integration please get in contact with the Scheidt & Bachmann GmbH sales partner.

This integration to our GeViScope system was invented by the company IDS Secur Systems GmbH. For further information about this integration please get in contact with the IDS Secur Systems GmbH sales partner.

 

GeViScope/re_porter interface - FaceReco (Face recognition)

Functionalities:

• Face recognition
• Blacklisted individual detection
• Access control

• Specifier Text
  GeViScope, re_porter interface -
  FaceReco (Face recognition)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the Facing-it system FaceReco.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 152 KB)

G-Link software option for the integration of the Access Control System manufactured by United Technologies. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each FCWnx Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/FCWnx
  
  G-Link software option for the integration of the
  Access Control System manufactured by United
  Technologies.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each FCWnx
  Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/FCWnx
  Brand: GEUTEBRÜCK or equivalent

G-Link software option for the integration of the Perimeter Control System manufactured by Fiber SenSys. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each FiberSenSys APU Devices. Maximum quantity available: 128
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/FibersensysAPU
  
  G-Link software option for the integration of the
  Perimeter Control System manufactured by Fiber
  SenSys.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each
  FiberSenSYS APU Devices. Maximum quantity
  available: 128
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/FibersensysAPU
  Brand: Geutebrück or equivalent

FoxVigi is able to get the live video stream from the recorders. Then it analyses the video stream in real time to detect intrusions. Finally it sends back to the recorders the alarm events or custom actions.

FoxVigi is able to get the live video stream from the recorders. Then it analyses the video stream in real time to detect intrusions. Finally it sends back to the recorders the alarm events or custom actions.

G-Core/OpenData connects ERP systems such as Microsoft Dynamics Navision or SAP to G-Core. Data can be retrieved event-driven from the ERP system.
For example, a barcode scan can trigger a search in the ERP system for the data assigned to the barcode. Data such as order number, customer address and supplier ID can then be displayed in the viewer and stored as metadata in the G-Core database.
A comprehensive configuration allows adaptation to many different situations. Thus, the communication with G-Core as well as the query of ERP data can be freely configured.

• Specifier Text
  G-Core/OpenData
  
  Software option for the connection of ERP and
  database systems, which provide data via the
  OASIS-certified Open Data Protocol (OData) to a
  G-Scope system based on G-Core. Communication
  takes place via http. Using this interface, data
  from events can be enhanced with associated data
  such as from an ERP system. These can be saved in
  the G-core database as metadata and used to
  quickly find events and video sequences. For
  example, the order number, addressee and
  transport company associated with a scanned
  parcel number can be determined and shown in the
  image of the scanning process. During a later
  analysis, all the scanning processes associated
  with a shipping order can be quickly found. Can
  be used with G-Core version 2.2.2.184 or higher.
  
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Core/OpenData
  Brand: Geutebrück or similar
• Caractéristiques techniques
  Windows Service runs under Windows 8.1 or higher.
  Microsoft Net Framwork 4.6.1 and Visual-C Redistributable Version 2015 are required.
  The service can be installed on any computer in the network.
  A G-Core/OpenData option is required.

G-Core/XML Connect is a basic interface that provides data in the XML format to G-Core. Communication with third-party software is enabled via plug-ins.
Currently two plugins are realized: A file plug-in processes XML files that are stored in a predefined directory. After processing, the files are deleted.
A second plug-in processes XML streams sent over TCP.
The interface, implemented as a Windows service, can react to events from both third-party software and G-Core. A G-Core event can, for example, trigger the query of data from the third party vendor software or data sent ad hoc from the third party vendor software trigger the evaluation and forwarding to G-Core.
The communication to G-Core and the way of evaluating the XML-formatted data is freely configurable. This allows the service to be adapted to a wide range of requirements.
Plugins for communication with third-party software can be developed by Geutebrück or by the third-party manufacturer itself.
Example application: A license plate recognition connected to G-Core supplies the license plate of a vehicle waiting at the barrier. G-Core/XML Connect is used to query access authorization from a third-party system. The barrier is opened or remains closed according to the result of the query.

• Specifier Text
  Software option for connecting any third-party applications that provide data via XML to a G-Scope system based on G-Core. Communication can take place via any interface, e.g. via file transfer or network. The integrated plugin architecture allows adaptation to any interface. Using this G-Core extension, actions can be triggered from external systems or data can be queried from this G-Core action in a controlled manner. For example, access to a depot can be automatically granted or denied by querying a license plate whitelist.
  Applicable from G-Core version 2.3.1.248.
  
• Caractéristiques techniques
  G-Core/XML Connect is a Windows service and runs under vWindows 8.1 or higher. It requires Microsoft Net Framework 4.6.1 and Visual C Redistributable Version 2015 and can be installed on any computer in the network.
  A G-Core/XMLConnect option is required for each connection to a third-party system.
• Télécharger le fichier (PDF, 546 KB)

G-Scope, GeViScope+, GeviSoft Interface - Southwest Microwave INTREPID™ MicroPoint™ Cable

Functionalities:

• Alarm control and manual control of camera display, recording and telemetry.

• Specifier Text
  G-Scope, GeViScope+, GeviSoft Interface -
  Southwest Microwave INTREPID™ MicroPoint™ Cable
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system G-Scope, GeViScope+, GeviSoft
  and the Southwest Microwave
  INTREPID™ MicroPoint™ Cable
  
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1601 KB)

G-Scope, GeViScope+, GeviSoft Interface - Southwest Microwave INTREPID™ Series II

Functionalities:

• Alarm control and manual control of camera display, recording and telemetry.

• Specifier Text
  G-Scope, GeViScope+, GeviSoft Interface -
  Southwest Microwave INTREPID™ Series II
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system G-Scope, GeViScope+,
  GeviSoft and the GeViSoft Interface -
  Southwest Microwave INTREPID™ Series II
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1601 KB)

G-Link software option for the integration of the Access Control System manufactured by Gallagher. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Gallagher Command Centre Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/Gallagher
  
  G-Link software option for the integration of the
  Access Control System manufactured by
  Gallagher.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Gallagher
  Command Centre Server.
  Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/Gallagher
  Brand: Geutebrück or equivalent

MultiScope III / GeViSoft Interface - GEBANIS b+m Informatik AG (house & building management system)

Functionalities:

• Interlinking hardware based via serial interface and also via software - including specific SDK according to respective device.

• Specifier Text
  MultiScope III / GeViSoft Interface - GEBANIS
  b+m Informatik AG
  (house & building management system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III or
  the interactive video management system
  GeViSoft and the house & building
  management system GEBANIS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViSoft Interface - GECIS Commend International (communication and security system)

Functionalities:

• Interface software for data exchange between the GEUTEBRÜCK video management system GeViSoft and the communication and security system from Commend International. The Interface software has to be licenced via dongle and can be installed on any Windows PC (W2K, XP) with serial interface port. It enables the coupling and the simultaneous operation of telecommunication units in combination with video switcher actions. Telecommunication requests can force the display of video signals or other actions under GeViSoft and vice versa. GeCIS supports the protocols ComWIN and SoftVideo from Commend International in combination with all available operations of GeViSoft via GeViAPI Interface. Via MscMRI Interface GeCIS also can control and force the display of pictures unter MultiView and GSCView. Without licence the software will run for evaluation purposes for the time of 2 hours. Please clarify the full range of functions to be realized with our technical sales support.

• Specifier Text
  GeViSoft Interface - GECIS
  Commend International
  (communication and security system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and the
  communication and security system from
  Commend International.
  License the interface software with a dongle
  and then transfer it to any Windows control
  computer (W2k, XP) with a serial interface.
  It enables coupling and common operation
  of stations in connection with video picture
  lock-on.
  Call requests can create video-lock-ons or
  other activities under GeViSoft and vice-versa.
  GeCIS supports the ComWIN and SoftVideo
  protocols from Commend International in
  conjunction with the full operative GeViSoft
  extent via GeViAPI-Interface.
  Additional picture lock-ons can be made using
  the MscMRI interface under MultiView and
  GSCView. For test purposes, the software can
  be used over a period of 2 hours without a
  license. If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, GeViSoft Interface - GEMOS ElaSoft (house & building management system)

Functionalities:

• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).

• Specifier Text
  GeViScope, re_porter, GeViSoft Interface -
  GEMOS ElaSoft (house & building management
  system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video system platform
  GeViScope or the video management system
  GeViSoft and the house & building management
  system GEMOS (ElaSoft).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (JPG, 42 KB)

G-Core Interface - GEMOS ElaSoft (house & building management system) 

Functionalities:

• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).

• Specifier Text
  Vollständige Integration der Anzeige (Viewer) von Live- und gespeicherten Videosequenzen des GEUTEBRÜCK Systems in der eigenen Bedienoberfläche.
  Steuerung der Videoaufzeichnung des GEUTEBRÜCK Systems.
  Externe Ereignis- und Alarmsteuerung des GEUTEBRÜCK Systems mittels vordefinierten Steuerbefehlen („Actions“).
  Ereignis- und Alarmsteuerung durch das GEUTEBRÜCK System mittels vordefinierten Steuerbefehlen („Actions“).

GeViScope, re_porter interface - Genesys (Security Management Software)

Functionalities:

• Live camera view
• PTZ control
• View recorded video
• Search by time and date
• Multiple speed play forwards and reverse
• Image grouping with synchronized replay
• Search by means of slide-bar

• Specifier Text
  GeViScope, re_porter interface -
  Genesys (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the ism system Genensys
  (Security Management Software)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 412 KB)

The Genesys2 Security Managment Software is an interface software for data exchange between the GEUTEBRÜCK picture recording systems GeViScope/re_porter and the ISM system Genesys2.

The features included in the integration are:

• View live video from the DVR, play recorded video
• Jump to time and date
• Use slide bar to review video
• Play recorded video backwards (multiple speeds)
• Play recorded video forwards (multiple speeds)
• Switch live cameras to monitors (GscView viewers)
• Play recorded video from each camera
• Use group images within GENESYS®
• Download video GEUTEBRÜCK GBF
• PTZ Control
• Trigger Events (sending actions)
• Receive alarm inputs
• Video Loss  Alarms from Cameras
• Motion detection using events
• Control Outputs directly or through Events
• Pre Post Events on GscView viewers
• Pre Post Alarms on GENESYS® Monitors

• Specifier Text
  GeViScope, re_porter interface – Genesys 2
  (Security Control Room Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the ISM system Genesys2.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 400 KB)

The Genesys2 Security Managment Software is an interface software for data exchange between the GEUTEBRÜCK picture recording systems G-Core and the ISM system Genesys2.

The features included in the integration are:

• View live video from the DVR, play recorded video
• Jump to time and date
• Use slide bar to review video
• Play recorded video backwards (multiple speeds)
• Play recorded video forwards (multiple speeds)
• Switch live cameras to monitors (GscView viewers)
• Play recorded video from each camera
• Use group images within GENESYS®
• Download video GEUTEBRÜCK GBF
• PTZ Control
• Trigger Events (sending actions)
• Receive alarm inputs
• Video Loss  Alarms from Cameras
• Motion detection using events
• Control Outputs directly or through Events
• Pre Post Events on GscView viewers
• Pre Post Alarms on GENESYS® Monitors

GeViSoft Interface - GeViAPI (control of all functions of GeViSoft via TCP/IP)

With this SDK the extensive functions of the Security Management System GeViSoft can be integrated into own applications. It allows simple access to a great number of hardware periphery interfaces provided by GeViSoft (e.g. Interbus-S contacts, matrices, telemetry, operator panels, video motion detectors). The API is a TCP/IP based Client API. Hereby each own development automatically becomes networkable without Low Level Socket programming.

GeViAPI allows, among others, the use of the following GeViSoft functionalities:

• Starting of GeViSoft activities
• Notification of activities or e vents created in GeViSoft
• Control of GeViSoft periphery
• Query of GeViSoft activities and alarm database
• Status queries of individual resources (e.g. allocation status of video screens or digital outputs)

• Specifier Text
  GeViSoft Interface - GeViAPI
  (control of all functions of GeViSoft
  via TCP/IP)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and
  external systems via TCP/IP.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: GeViAPI
  Make: GEUTEBRÜCK
  or equivalent

GeViSoft Interface - GeViCom (serial interface of GeViSoft)

Functionalities:

• This serial interface of GeViSoft supports the complete extent of functions as does the network-GeViAPI. All GeViSoft functions provided by GeViAPI can also be used via this interface.

• Specifier Text
  GeViSoft Interface - GeViCom
  (serial interface of GeViSoft)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and
  external systems via serial link.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: GeViCom
  Make: GEUTEBRÜCK
  or equivalent

GeViSoft Interface - GeViGST (simple serial interface of GeViSoft)

Simple serial interface of GeViSoft provided in order to keep VicorSoft (predecessor model) compatible to GeViSoft.

This interface only supports a limited extent of GeViSoft functionalities as:

• Triggering of events
• Switching with matrices
• Display of contacts
• Notifications regarding GeViSoft events

• Specifier Text
  GeViSoft Interface - GeViGST
  (simple serial interface of GeViSoft)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and
  external systems via serial link (simple protocol).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: GeViGST
  Make: GEUTEBRÜCK
  or equivalent

GeViScope, re_porter interface - GMS (Graphical Management System)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Individual picture export.
• Export of event-controlled video recordings in GBF (Geutebrück Bild [Picture] Format) or in MPEG-4 format.
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.
• PTZ control (Pan-Tilt-Zoom).

• Specifier Text
  GeViScope, re_porter interface -
  GMS (Graphical Management System)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Pacom System GMS
  (Graphical Management System).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (JPG, 56 KB)

GeViSoft Interface - Haverkamp (perimeter protection system)

Functionalities:

• Alarm control and manual control of camera display, recording and telemetry.

• Specifier Text
  GeViSoft Interface - Haverkamp
  (perimeter protection system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video
  management system GeViSoft and the
  Haverkamp perimeter protection system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Video Management System manufactured by HikVision. This option realizes the direct communication between the systems connected to the G-Link Server. The option enables the connection of 128 HikVision NVR/DVR. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/HikVisionCentral
  
  G-Link software option for the integration of the
  Video Management System manufactured by HikVision.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option enables the connection of 128
  HikVision NVR/DVR.
  Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/HikVisionCentral
  Brand: Geutebrück or equivalent

Allow for HVS to access Geutebruck media channels

1. Live stream on HVS from G-Core
2. Playback from a specific time
3. Basic PTZ functionality (No presets or tour)
4. Export video from a timeframe
5. Getting camera/media channel information"



https://www.hitachiinsightgroup.com/en-us/smart-cities.html

MultiScope III Interface - Huth (cash desk system)

Functionalities:

• Documentation of cash processes.
• Fuel station cash systems (petrol pump and cashier notifications) control MSC recording.
• Serial linking via Multicom.
• Cash data are stored in the MSC database as accompanying data with video recordings.

• Specifier Text
  MultiScope III Interface - Huth
  (cash desk system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the Huth cash desk system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, MultiScope III Interface - IBM Automated Teller Machines (PBM protocol)

Functionalities:

• Serial connection via Multicom.
• This protocol is used by many other manufacturers as for example Diebold, Wincor-Nixdorf, Fiducia, etc.

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  IBM Automated Teller Machines (PBM protocol)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and IBM automated teller machines
  (PBM protocol).
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

IFTER EQU is a software for security systems management such as: Fire Alarm Systems (FAS), Intruder and Hold Up Alarm Systems (I&HAS), Access Control Systems (ACS), Closed Circuit Television (CCTV), control-measuring systems (CMS) and building automation.

IFTER EQU is a software for security systems management such as: Fire Alarm Systems (FAS), Intruder and Hold Up Alarm Systems (I&HAS), Access Control Systems (ACS), Closed Circuit Television (CCTV), control-measuring systems (CMS) and building automation.

G-Link software option for the integration of the Gaming Technology System by International Gaming Technology. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each IGT Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/IGTServer
  
  G-Link software option for the integration of the
  Gaming Technology System by International Gaming
  Technology.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each IGT
  Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/IGTServer
  Brand: Geutebrück or equivalent

G-Link software option for the integration of the Access Control System manufactured by Inner Range. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Inner Range Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/InnerRangeInsight
  
  G-Link software option for the integration of the
  Access Control System manufactured by Inner Range.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Inner
  Range Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/InnerRangeInsight
  Brand: Geutebrück or equivalent

InPro BMS is an information system for visualization, integration and safety management system, used to build alarms monitoring centres. The built-in support of access control, closed-circuit television, intruder & hold up alarm, fire alarm and also building management systems enables to evaluate one system's reaction for an event that occurred in the other system.

InPro BMS is an information system for visualization, integration and safety management system, used to build alarms monitoring centres. The built-in support of access control, closed-circuit television, intruder & hold up alarm, fire alarm and also building management systems enables to evaluate one system's reaction for an event that occurred in the other system.

inSynergy develops and designs complete systems for multimedia control. For the project “Uniklinik Köln” several re_porters and GeViScopes were integrated in the multimedia contros system developed by inSynergy.

• THE REQUIREMENT
  At a training center, students need the opportunity to practice daily exercises in various training units. Iinstructors have to be able to record training lessons in any one of four central observer rooms. From there they need the possibility to set markers at any time during a running recording in order to flag a certain situation which they intend to discuss with the students later on in evaluation talks. All the camera systems must be controlled from the observer rooms, live video data should be streamed to any one or all of the lecture rooms. Recordings have to be stored in a database and should be accessible from any seminar rooms.
  
  
• Camera operation
  Camera systems in training units can be operated and controlled by individual touch panel interfaces (iSoperate). Control system iSmaster manages selection of individual cameras and the synchronous start of record of the selected cameras. They all can be kept under surveillance with a split screen application on the director‘s touch panel or they could be shown on projections in the seminar rooms. Playlist administration in iSDataManage all video and audio records as well as markers are saved in an iSdatamanage instance adding information on user, location and date. The terminals in the various lecture rooms also access the database for playback. Setting markers during recording, the accompanying lecturer can set markers to make finding of special situations in the video easier without waiting for the video to arrive at the time position in realtime. These markers can be indexed and are stored in databases. They are valuable information for research and teaching.

• Specifier Text
  GeViScope, re_porter interface -
  inSynergie (Media control)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the inSynergie system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 1756 KB)

The Integriti Geutebruck Plug-In provides a high level interface between Inner Range's Integriti integrated access control, security and automation system.  It allows live or historical video to be shown on the Integriti head-end and client consoles, interchange of event information, and streaming of event related video.

The Integriti Geutebruck Plug-In provides a high level interface between Inner Range's Integriti integrated access control, security and automation system.  It allows live or historical video to be shown on the Integriti head-end and client consoles, interchange of event information, and streaming of event related video.

G-Link software option for the integration of the Video Management System manufactured by iOmniscient. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each iOmniscient Server. Maximum quantity available: 4
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/IOmniscientServer
  
  G-Link software option for the integration of the
  Video Management System manufactured by
  iOmniscient.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each
  iOmniscient Server. Maximum quantity available: 4
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/IOmniscientServer
  Brand: Geutebrück or equivalent

This integration to our G-Core system was invented by the company Proline. For further information about this integration please get in contact with the Proline sales partner.

MultiScope III Interface - Pecunia Cash Count (Management) System

Functionalities:

• Video surveillance of cash counting processes
• Storage of cash management data of the counting process
• Database playback and presentation of data of the process by GscView, MultiView

• Specifier Text
  MultiScope III Interface -
  Pecunia Cash Count (Management) System
  
  Interface software for data exchange
  between the GEUTEBRÜCK systems MultiScope III and the Pecunia Cash Count
  (Management) System.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 45 KB)

G-Link software option for the integration of the Network Communication System manufactured by Jacques. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Jacques Controller. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/Jacques
  
  G-Link software option for the integration of the
  Network Communication System manufactured by
  Jacques.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Jacques
  Controller. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/Jacques
  Brand: Geutebrück or equivalent

Automatic Detection of the Arrival and Parking Time of Vechicles

Long-term and illegal parkers at customer parking areas block the limit available parking lots and cause a drop in sales. Up to now an observation of a parking area without a parking lot barrier is only possible with high personnel costs. Additionally there is also the requirement for observation of fire apparatus access roads, drive-in roads, short-term parking zones (e.g. loading zones), and factory sites (arrival of trucks, etc.) With viasense – Car Park Monitoring the parking area is observed by one or several video cameras. The image data is processed by the software system which automatically detects arrival and parking time of vehicles. If a vehicle is detected which exceeds the allowed parking time or which parks on a forbidden area, an alarm is displayed and automatically an email message is generated.

Functionalities:

• Round the clock observation
• Cost-efficient solution for autonomously monitoring of the parking area which allows a customer friendly operation (note on the car, putting out a call for the driver, tolerance time depending on parking lot utilization)
• Long-term and illegal parkers will be detected before they leave the parking lot. Thereby it is possible to inform the driver without expensive and time consuming license plate lookup and correspondence
• Further you have the general advantages of video observation: deterring vandalism, documentation and traceability of other incidents (unreported parking damages, car theft, illegal dumping, etc.)

• Specifier Text
  GeViScope, re_porter interface -
  viasense Car Park Monitoring
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the JOANNEUM RESEARCH system
  viasense Car Park Monitoring.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 117 KB)

GeViScope, re_porter Interface - K32 (access control systems)

Functionalities:

• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).

• Specifier Text
  GeViScope, re_porter Interface -
  K32 (access control systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Autec system K32.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

The KiwiVision® Video Control Center is the ideal platform for control centers using video monitoring. On the one hand, video control centers have to cope with an immense information flood and operate in a technically heterogenous environment, as systems of different manufacturers have to be combined. KiwiVision® VCC enables the integration of third party VMS and DVR systems in an interface which is optimized for control centers. This is built upon the basis of the unlimitedly scalable architecture enabling the access to all KiwiVision® analyses, thus turning it into a future-proof investment. Integration is done for GeViScope and G-Core.

• Télécharger le fichier (PDF, 2200 KB)

The KiwiVision® Video Control Center is the ideal platform for control centers using video monitoring. On the one hand, video control centers have to cope with an immense information flood and operate in a technically heterogenous environment, as systems of different manufacturers have to be combined. KiwiVision® VCC enables the integration of third party VMS and DVR systems in an interface which is optimized for control centers. This is built upon the basis of the unlimitedly scalable architecture enabling the access to all KiwiVision® analyses, thus turning it into a future-proof investment. Integration is done for GeViScope and G-Core.

GeViScope, re_porter interface - LFS 400 (Logistics)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.

• Specifier Text
  GeViScope, re_porter interface - LFS 400 (Logistics)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the E+P system LFS 400.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 591 KB)

GeViScope, re_porter, GeViSoft interface - Manitou (Surveillance of central stations)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria.
• PTZ control (Pan-Tilt-Zoom).

• Specifier Text
  GeViScope, re_porter, GeViSoft interface -
  Manitou (Surveillance of central stations)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system GeViScope, re_porter or
  the video management system GeViSoft and
  the Bold Technologie system Manitou.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

MultiScope III Interface - Microscan (barcode scanner)

Functionalities:

• Scan events control the MultiScope III recording.
• Documentation of the complete scan processes.

• Specifier Text
  MultiScope III Interface - Microscan
  (barcode scanner)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  Microscan barcode scanner.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Point-of-Sale System manufactured by Micros. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Micros Server. Maximum quantity available: 1 Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/MicrosServer
  
  G-Link software option for the integration of the
  Point-of-Sale System manufactured by Micros.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Micros
  Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/MicrosServer
  Brand: Geutebrück or equivalent

GeViScope, re_porter interface - Military simulation systems

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• Export of event-controlled video recordings in GBF (Geutebrück Bild [Picture] Format) or in MPEG-4 format.

• Specifier Text
  GeViScope, re_porter interface -
  Military simulation systems
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the military simulation systems
  of the company Rheinmetall Defence.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

MultiScope III Interface - Miniter Bosch (card reader for access control system)

Functionalities:

• Control of MultiScope recordings and storage of card data and MSC III pictures.
• Serial connection via Multicom.
• The units can be connected in a bus.

• Specifier Text
  MultiScope III Interface - Miniter Bosch
  (card reader for access control system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the Bosch access control system Miniter.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter Interface - MOSIS (network and information technique, BlackBerry)

Functionalities:

• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).

• Specifier Text
  GeViScope, re_porter Interface - MOSIS
  (network and information technique,
  BlackBerry)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video system
  platform GeViScope, re_porter and
  the Netzlink BlackBerry system MOSIS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

MultiScope III Interface - Multivid / NCR (automated teller machines)

Functionalities:

• Different derivatives like NCR protocol Multivid, NCR PBM (mix from NCR and PBM protocols), "CasinoS Cash" and "NCR APTRA"

• Specifier Text
  MultiScope III Interface - Multivid / NCR
  (automated teller machines)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  Multivid / NCR automated teller machines.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter GscView extension interface – Dat-Con Supervisor PIKI (Security Management Software)

Supervisor PIKI is a program for the mandatory entry of user comments for certain user activity made in GSCView. The program runs independently from GscView. The comments are logged in the meta data of the GeViScope database.

Each comment contains the following information:

• date and time
• Type of action
• the name of the camera
• name of the computer
• name of the user
• file name of video export

• Specifier Text
  GeViScope, re_porter interface - Supervisor PIKI
  (Security Management Software)
  
  Interface software for data exchange between the
  GEUTEBRÜCK picture recording systems GeViScope,
  re_porter and the Dat-Con system Supervisor PIKI
  (Security Management Software)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Access Control System manufactured by Nedap. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Nedap Server. Maximum quantity available: 4
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/NedapAEOS
  
  G-Link software option for the integration of the
  Access Control System manufactured by Nedap.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Nedap
  Server. Maximum quantity available: 4
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/NedapAEOS
  Brand: Geutebrück or equivalent

G-Core/OnEvent - OnGuard-Interface (Access Control Systems)

Functionalities:

• - With OnGuard, the innovative security solution from Lenel, access control systems can be realized in any size.
• - G-Core/OnEvent – the interface receives all configured event messages / access information from OnGuard and controls the GEUTEBRÜCK video security system distributed in the network in real time. In the other direction, the GEUTEBRÜCK system controls and monitors the components of the OnGuard system.
• - According to the corresponding configuration, all entry information activates the live image display and starts video recording of the respective door camera. Each process is monitored, documented and can be searched without gaps based on search criteria provided.

• Specifier Text
  G-Core/OnEvent - OnGuard-Interface (Access Control Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems G-Core/OnEvent and
  the Lenel system OnGuard.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1387 KB)

GeViSoft Interface - OPC Interface (standard interface, industry automation)

Functionalities:

• OPC (OLE for Process Control) is a standardised interface from the industry automation sector and is supposed to reflect a set of parameters standardised for OPC clients.
• Control of MSC is only possible under certain conditions.
• The GeViSoft server realises the following OPC specifications:
  
  OPC DA Server 2.0, OPC DA Server 3.0, OPC Security 1.0. Via this interface the client is informed about all changes to contacts, cameras and systems within the GeViSoft system and, if necessary, it can make changes itself (e.g. close contacts or display cameras). Additionally it can transmit all GeViSoft commands via the command interface into the system.

• Specifier Text
  GeViSoft Interface - OPC Interface
  (standard interface, industry automation)
  
  OPC interface for the connection of
  GEUTEBRÜCK system components via GeViSoft.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: OPC Interface
  Make: GEUTEBRÜCK
  or equivalent

MultiScope III Interface - OPC Interface Schille Informationssysteme GmbH (house & building management)

Functionalities:

• Interface of GEUTEBRÜCK MultiScope III SDK.

• Specifier Text
  MultiScope III Interface - OPC Interface
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the OPC interface of the company
  Schille Informationssysteme GmbH.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Processing data such as container number, customer number, customer name, default amount, amounts counted, differences, etc. are transferred to the video system. This can be used to search for these criteria. The data is also displayed in the video stream

Processing data such as container number, customer number, customer name, default amount, amounts counted, differences, etc. are transferred to the video system. This can be used to search for these criteria. The data is also displayed in the video stream

ESELTA software is an integrated safety system with the primary goal to combine the integration and the centralized management of all safety systems for a building.

The basic subsystems:

• CCTV
• Access control
• Intruder alarm
• Fire alarm

The ESELTA platform also offers the possibility to integrate control systems for building climate control, health monitoring of a building, telephone communication, door intercommunication systems, etc.

This GeViScope/re_porter interface for ESELTA offers the following benefits to the end user:

• Management of all systems out of one central software
• Automatic display of video from cameras nearest to a place of occurrence of a fire, alarm or any other events (switching-on the alarm screen)
• Playback of video in real time using a video camera chosen from graphic plans or from the list of video cameras
• Monitoring health of video cameras and Geviscope recorders from one central workplace
• Adjustment of scenes (set up viewer matrices and scenes)
• PTZ control (Pan-Tilt-Zoom)
• automatic call-up of preset positions due to fire, intruder and access control alarms
• Viewing of recorded video footage and replaying video sequences belonging to ESELTA alarms
• Use GeViScope motion detection triggers as source for ESELTA alarms
• automatically add all available video cameras of GeViScope/re_porter to the ESELTA configuration
• export of recorded video sequences and snapshots
• printing snapshots

• Specifier Text
  GeViScope/re_porter interface –
  Petersoft ESELTA
  (security management software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the Petersoft system Eselta.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 1247 KB)

GeViSoft Interface - Prisma ElaSoft (House & Building Systems) Connection via GeViGST

Functionalities:

• Triggering of events
• Switching to matrices
• Contact switching
• Notifications about GeViSoft events

• Specifier Text
  GeViSoft Interface - Prisma ElaSoft
  (House & Building Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the ElaSoft house & building
  system Prisma.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - Pronto (House & Building Systems)

Functionalities:

• Remote control of the GEUTEBRÜCK GscView (in the viewer mode – operating controls hidden) via control elements in the user interface.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Display of GEUTEBRÜCK Live Video Streams on pronto.
• Selection of the Video Streams to be displayed via buttons of the pronto.
• Navigation in available Video Streams. 
• PTZ control (Pan-Tilt-Zoom).
• Preset Position Support.

• Specifier Text
  GeViScope, re_porter interface - Pronto (House & Building Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the audionetwork system Pronto.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 2548 KB)

G-Link software option for the integration of the Access Control System manufactured by Protege. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Protege Server. Maximum quantity available: 1
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.


Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html

• Specifier Text
  G-Link/Protege
  
  G-Link software option for the integration of the
  Access Control System manufactured by Protege.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Protege
  Server. Maximum quantity available: 1
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/Protege
  Brand: Geutebrück or equivalent

GeViScope, re_porter interface - Primion psm2200 (Security Management Software)

The customer enjoys high levels of beneficial synergy effects through the combination of video surveillance, access control and hazard detection technology, as alarms and specifically defined events can be stored with accompanying visual data. Additionally, follow-on actions can be defined and executed automatically.

Video surveillance systems - top performance through a combination of single-source hardware and software

Functionalities:

• Connection of video cameras (IP cameras from Axis, Mobotix and GEUTEBRÜCK) and/or analogue cameras through a video server (Axis 240 and Axis 241)
• Time-controlled recording through event time zones
• Up to a maximum of 20 cameras recommended for the Camera management server
• Up to 16 cameras can be shown on screen at the same time
• Live image feeds with PTZ control
• Recording can be done manually, time-controlled or event- controlled (alarm recording through TopView, Extended event control or camera events)
• Play back and archiving of image data
• Integrated connection to prime TopView and alarm management module
• Pre- and post-alarm times
• Browser-based user interface, independent of operating system
• Fully functionality using Internet Explorer, >= version 6.0 and Firefox >= version 2.0. Other browsers based on Mozilla 5.0 (SeaMonkey, Mozilla, Netscape) can be used.
• JAVA solution
• Client and server platform-independent
• Runs with the Tomcat servlet container (included in delivery). Other servlet containers and/or application servers can be used. Details available on request.
• Data access protection through 32,000 passwords in 32,000 user groups
• Location-independent user settings
• Unlimited TCP/IP communication structure
• Various reports can be output to printer, screen, PDF, HTML or Excel with user-assignable report groups
• Data from the prime WebSystems database
• With the modern video surveillance technology from primion, you get a robust system consisting of DVRs through RAID systems, surveillance cameras with optional motion detectors, IP cameras and interfaces to video management systems.

• Specifier Text
  GeViScope, re_porter interface -
  Primion psm2200 (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and the Primion system psm2200.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViSoft Interface - Rubin Bosch (alarm management system)

Connection via GeViGST.

Functionalities:

• Triggering of events
• Switching to matrices
• Contact switching
• Notifications about GeViSoft events

• Specifier Text
  GeViSoft Interface - Rubin Bosch
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the Bosch alarm management
  system Rubin.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - SafeZone (Intelligent video sensors)

Functionalities:

• Keeneo delivers a seamless, comprehensive and accurate video analytics solution to improve customer’s security and enhance their operations.
• Keeneo’s SafeZone and Metric Manager Video Analytics software is seamlessly and fully integrated with GEUTEBRÜCK GeViScope Enterprise Surveillance Systems. By using this integration scheme, security or operational personnel can manage the Keeneo video analytics software as well as respond to corresponding alarms, alerts or conditions using the GEUTEBRÜCK GSCView software user interface. Alarms and OSD’s generated by Keeneo's image processing are transmitted automatically to GSCView over the network. As a result, the management of all alarms generated by the video analytics can be performed easily and fluidly through the GSCView. In fact, GSCView can trigger any sequence of actions supported by the GEUTEBRÜCK system.

• Specifier Text
  GeViScope, re_porter interface -
  SafeZone (Intelligent video sensors)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Keeneo system SafeZone.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1075 KB)

MultiScope III Interface - Scheidt & Bachmann (petrol station system TMS20 / TMS30)

Functionalities:

• Connection via MultiCom.
• Recording control through fuel station and parking garage events.

• Specifier Text
  MultiScope III Interface - Scheidt & Bachmann
  (petrol station system TMS20 / TMS30)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the Scheidt & Bachmann petrol station
  system TMS20 / TMS30.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope / MultiScope III Interface - Schille Informationssysteme (house & building management)

Functionalities:

• Interface to MultiScope II, MultiScope III and GeViScope for live picture display and PTZ control. Supports up to 256 units with up to 32 video inputs each.

• Specifier Text
  GeViScope / MultiScope III Interface - Schille
  Informationssysteme
  (house & building management)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  video system platform GeViScope or
  the picture recording system MultiScope III
  and the Schille house & building management
  system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - SEAGUARD (Security Management Software)

Functionalities:

• Seamless integration of live streams and recorded video footage in the SEAGUARD user interface
• PTZ control of cameras connected to GeViScope/re_porter

• Specifier Text
  GeViScope, re_porter interface -
  SEAGUARD (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the Seawing system SEAGUARD
  (Security Management Software)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 6587 KB)

Integration in Universal Management System (UMS) of Securiton AG

www.securiton.ch/ch-en/products/security-management-systems.html

• Caractéristiques techniques
  Exchanging alarm information (sync signal lost, motion detection, start/stop of event recordings, …)
  
  

GuardPointPro is an on-line access control and alarm monitoring system.

This GeViScope/re_porter interface for GuardPoint Pro offers the following benefits to the end user:

• Seamless integration of live and recorded video in the graphical user interface of GuardPoint Pro
• Displaying belonging video of an alarm handled by GuardPoint Pro

GuardPoint Pro offers sophisticated access control and alarm management solutions for all size installations and levels of complexity. GuardPoint Pro is probably the most advanced on-line security software on the market today that is still the simplest to use.

The huge system capacity enables an unlimited number of cardholders, controllers, readers, supervised alarms, outputs, video servers, operators, access groups and security levels. GuardPoint Pro seamlessly monitors lift, parking, guard tours, time & attendance, multiple client workstations applications, as well as video and biometric integrations. The GuardPoint Pro software can be shared by several entities located in the same building and offers a solution for international companies with offices spread all over the world.

The powerful communication environment allows redundant communication, alarm event mode, communication encryption and reflexes for emergency and routine operations, through different networks like RS485, TCP/IP, etc.

GuardPoint Pro efficiency and security is based on database mirroring, redundancy DB architecture, data archival and back-up and bi-directional data exchange. The distributed architecture of the single integrated relational database allows for central monitoring and control.

The user-friendly software is easy to configure and use with predefined parameters for fast installation, automatic actions and reflexes as well as personalized report wizard. Full information on real time alarms and events is provided on the active alarm window, event log, diagnostic screens and live interactive graphical maps.

• Unlimited number of cardholders, doors, controllers, readers, supervised alarm inputs, door lock outputs, access groups, security levels, operators, etc.
• Advanced report wizard
• Time and attendance report
• Integrated badge printing
• Real time cardholder ID photo capture     
• Built-in default settings for quick setup
• Advanced features: crisis level, escort, interlock, counter, action and process control, site maps with real time animated icons, alarm priority levels, etc. 
• Operating system/compatibility: Windows7/Windows 2000/XP/Vista
• On line remote site: LAN/WAN, dial up modems
• DB engines: MS-Access, SQL 2000/2005
• Cardholder database import: ODBC compliant (Access, Excel, etc.)
• Alarm event mode
• Communication encryption
• Global reflex with or without PC
• Anti-passback with or without PC
• Built-in finger print support
• Translation tool for software
• Web Interface

• Specifier Text
  GeViScope, re_porter interface –
  Sensor Access GuardPoint Pro
  (Access control and alarm monitoring system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the Sensor Access system GuardPoint Pro
  (Access control and alarm monitoring system)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Link software option for the integration of the Laser Management System manufactured by Sick. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each Sick Scanner. Maximum quantity available: 1000
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

Please check the following link for further information about the interface:
https://www.geutebrueck.com/media/_public/homepage/content/g_link_softwareoptions_overview.pdf

Please check the following link for further information about G-Link:
https://www.geutebrueck.com/en_EN/security-management-g-link-46616.html.

• Specifier Text
  G-Link/SickLMS
  
  G-Link software option for the integration of the
  Laser Management System manufactured by Sick.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each Sick
  Scanner.
  Maximum quantity available: 1000
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/SickLMS
  Brand: Geutebrück or equivalent

Following Events produced by the perimeter protection systems ABSOLUTE Plus (Dual Tech Barrier) and DAVE (Digital Microwave Barrier) or HYPERPOWER (security integrated platform) are transferred to GeViSoft through Sicurit Interfaces:

• Dual Tech Alarm (ABSOLUTE Plus only)
• Microwave Alarm
• Tamper 24H
• Fault
• Connection status

Interfaces:

1. CMH9000ABS (Links 2 sets of Dual Tech barriers ABSOLUTE Plus)
2. CMH9000ABSOLUTE (Links 8 sets of Dual Tech barriers ABSOLUTE Plus)
3. CMH9000DAVE (Links 8 sets of Digital MW Barriers DAVE)

HYPERPOWER security integrated platform doesn’t need any hardware interface neither licenses for transferring alarm information into GeVISoft.

Complete set for high security protection system include.

• Digital Dual Technology barrier up to 200mt
• Active Digital MW barrier up to 200mt
• IP connection
• Feature setting and complete diagnostic
• Interface to any other sensors
• All the event from sensor can be transfer to GeviSoft
• The client can monitor remote locations and receive intrusion alarms and events using a centralized solution

• Specifier Text
  GeViSoft interface -
  SICURIT - Perimeter protection systems –
  Security Management Platform Hyper Power
  
  Interface software for data exchange
  between the GEUTEBRÜCK interactive
  video management system GeViSoft
  and the SICURIT - Perimeter protection
  systems
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (JPG, 789 KB)

GeViScope, re_porter interface - SightSensor (intelligent video surveillance platform)

Functionalities:

• Control of the video recording of the GEUTEBRÜCK system.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• PTZ control (Pan-Tilt-Zoom)

• Specifier Text
  GeViScope, re_porter interface -
  SightSensor (intelligent video surveillance platform)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the SightLogix system SightSensor.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (JPG, 489 KB)

MultiScope III / GeViSoft Interface - Simatrix Siemens (matrix system)

Functionalities:

• Connection to Siemens risk notification installation manager (GMA-Manager) of the SIS / TOPSIS group. A SIMATRIX can be connected to the GMA-Manager via an RS-232 interface.

• Specifier Text
  MultiScope III / GeViSoft Interface - Simatrix
  Siemens (matrix system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III or
  the video management system GeViSoft and
  the Siemens matrix system Simatrix.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

In addition to the OPC client and server interfaces, there are various data interfaces for external contacts and the control as a virtual video crossbar, as well as a transfer interface for the integration of hazard reporting and safety devices.

G-Core  - Schille Informationssysteme (house & building management)

Functionalities:

• Interface to G-Core for live picture display and PTZ control. Supports up to 256 units with up to 32 video inputs each.

• Specifier Text
  G-Core - Schille
  Informationssysteme
  (house & building management)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  video system platform G-Core
  and the Schille house & building management
  system.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  

Provide the results of the LPR/ANPR actions and the "Access Granted/Denied" actions from the Geutebrück VAM to Skidata.

• Télécharger le fichier (PDF, 566 KB)

G-Link software option for the integration of the Perimeter Control System manufactured by Southwest Microwave. This option realizes the direct communication between the systems connected to the G-Link Server. The option is required for each RPMII. Maximum quantity available: 48
Please find further details on the range of function in the description. For project-specific questions as well as information on new potential integrations please refer to our department Integrations & SDK.

• Specifier Text
  G-Link/SouthwestRPMII
  
  G-Link software option for the integration of the
  Perimeter Control System manufactured by Southwest
  Microwave.
  This option realizes the direct communication
  between the systems connected to the G-Link
  Server. The option is required for each RPMII.
  Maximum quantity available: 48
  Please find further details on the range of
  function in the description. For project-specific
  questions as well as information on new potential
  integrations please refer to our department
  Integrations & SDK.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: G-Link/SouthwestRPMII
  Brand: Geutebrück or equivalent

The integration of STENTOFON AlphaCom with GEUTEBRÜCK GeViScope enables video stream routing under control of commands issued by AlphaCom.

All commands (actions) which GeViScope recognises through its TACI interface module can be issued by AlphaCom, where the commands to connect cameras to monitors or clear the monitor will be the most widely used by the interface.

This will allow cameras to be connected on call and call request events, including changes to the viewed camera when the guard scrolls through the call request queue on the intercom station.

• Specifier Text
  GeViScope, re_porter interface -
  STENTOFON AlphaCom (communication platform)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the Zenitel system STENTOFON.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

This integration to our G-Core system was invented by the company Tehnozavod. For further information about this integration please get in contact with the Tehnozavod sales partner.

GeViScope, re_porter, MultiScope III Interface - Telemetry Interface (dome and pan / tilt systems)

GEUTEBRÜCK supports the following dome protocols:

• KDec200/300, GVD640 (GEUTEBRÜCK PTZ protocol),
• JVC (TK-C675/676),
• Pelco,
• Samsung,
• Panasonic,
• Ernitec,
• TVI Lederer (Argovision), TVI Lederer (Argovision 422),
• BBV,
• American Dynamics,
• Scorpio (VTC),
• MIC1-300,
• Sony (Visca),
• Thomson (TS-RC11),
• Sensormatic,
• Dennard,
• VCL TP,
• VICON (Extendet), VICON (VicOld),
• Roboscan,
• Ultrak (KD6),
• Philips (TC8560/TC700),
• Molynx (TTX309),
• Star,
• Variotherm,
• Grundig (FWE52),
• ADT/Tyco (Sensormatic)

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  Telemetry Interface (dome and pan / tilt systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  external dome and pan / tilt systems.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

MultiScope III Interface - Transpondersystem for Wireless Tracking

Functionalities:

• Localisation function of the radio scanner including the allocation of the respective camera recording.
• Collection of scanned data in the network
• Position query via TeraTron Transponder System
• Event and recording control in the MSC3 database

• Specifier Text
  MultiScope III Interface - Transpondersystem
  for Wireless Tracking
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording system MultiScope III and
  the GEUTEBRÜCK transpondersystem for
  wireless tracking.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
  
  Model: Transpondersystem for
  Wireless Tracking
  Make: GEUTEBRÜCK
  or equivalent

This integration to our G-Core system was invented by the company Thales Security Solution. For further information about this integration please get in contact with the Thales Security Solution sales partner.

This integration to our G-Core system was invented by the company Thales Security Solution. For further information about this integration please get in contact with the Thales Security Solution sales partner.

All cameras from a Geutebrück video server are integrated into a PCS7 control system with various functions.

• Specifier Text
  
  

Live multi cameras, Retrieve remote config for cameras and relays, Timeline playback, Relays switching, PTZ (Manual, preset, preset save)

Live multi cameras, Retrieve remote config for cameras and relays, Timeline playback, Relays switching, PTZ (Manual, preset, preset save)

Vaelsys plugins for MASvideo enable a better integration of video in MASterMind. Our plugins let operators  connect to third party video devices (in this case G-core SDK based Geutebück devices) and video verify MASterMind alarms through real time or event clips.

GeViScope, re_porter Interface - VARANUS (Alarm Management Systems)

Functionalities:

• Complete Integration of display of live or recorded video sequences of the GEUTEBRÜCK system in the own user interface.
• The customer can monitor remote locations and receive intrusion alarms and events using one common centralized solution.
• The predefined presets of PTZ cameras (control of PTZ cameras) and presentation of those preset positions on the VARANUS CMS maps, provide the operator the possibility of simple presentation of cameras on maps and angle of specific camera preset position.

• Specifier Text
  GeViScope, re_porter Interface -
  VARANUS (Alarm Management Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the Agileon system VARANUS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 583 KB)

GeViSoft Interface - VAZ300 (remote control of Plettac / Funkwerk matices)

Functionalities:

• Interface for control of Plettac matrices and Plettac periphery.
• This control is bi-directional, Plettac can also control GeViSoft. Thus is it is possible that VAZ300 is able to control, for example, a GEUTEBRÜCK CX3.

• Specifier Text
  GeViSoft Interface - VAZ300
  (remote control of Plettac / Funkwerk matices)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  video management system GeViSoft and
  the Plettac / Funkwerk matrix system
  VAZ300.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter interface - Videmo (face detection)

Intelligent video analysis technology - Face detection Videmo's face analysis technology detects faces in video streams and estimates their orientation. This information can be used for intelligent archiving, for further analysis such as for ex. identification or gender recognition, for triggering actions such as recording start, alarms, etc.

Properties:

• Live and offline processing of video sequences from the Geutebrück system
• Detection of faces down to a minimum size of 24x24 pixels
• Horizontal head pose estimation (optional) up to +- 60°
• Adaptable to a wide range of scenarios

• Specifier Text
  GeViScope, re_porter interface -
  Videmo (face detection)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  and the Videmo system (face detection)
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, re_porter, MultiScope III interface - ViewPoint (Security Management Software)

Functionalities:

• The integration of GEUTEBRUCK CCTV systems with MAXXESS security management software presents system integrators with a whole new set of business opportunities. In a tough economic climate the MAXXESS / GEUTEBRUCK technology partnership will give you a competitive edge while offering your clients significant extra value from their investment in security systems.
• Reduced operating costs
• Systems which adapt to clients changing needs
• Open architecture interaction between previously closed systems
• Simple to understand, configure and operate open platforms
• Seamless migration to future technologies
• Efficient use of security personnel

• Specifier Text
  GeViScope, re_porter, MultiScope III interface -
  ViewPoint (Security Management Software)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and the MAXXESS system ViewPoint.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 5049 KB)

Based on TCP/IP EDIO (External Data Input Output) in the AlphaCom, all G-Core actions can be used by the event handler in the alphaCom to control G-View. Also G-core events can control the AlphaCom. The events in the Alphacom needs custom configuration regarding the needs per project. i.e. Manage camara images during intercom calls. Activate audio messages during G-core events.

GeViScope, re_porter interface - ViPRO.GMS (House & Building Systems)

Functionalities:

• Seamless display of live video material in user interface of “VIPRO.GMS”
• PTZ Control via “VIPRO.GMS”
• Control of video recording via “VIPRO.GMS” (manual recording via user)
• Alarm in “VIPRO.GMS” is alarm trigger for GeViScope/re_porter
• GeViScope/re_porter is alarm source for “VIPRO.GMS”
• Single picture export Display of several Video Streams in “VIPRO.GMS”
• Playback of recorded video material to a “VIPRO.GMS” alarm
• Search in recorded video material via Date/Time
• Combination of video streams to video walls
• Video Display integrated in action plans

• Specifier Text
  GeViScope, re_porter interface -
  ViPRO.GMS (House & Building Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter
  and the ViPRO.SYS system ViPRO.GMS.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (PDF, 1172 KB)

The VIPRO.gms building management system includes interface implementations for the connection of one or more systems for all 3 product series.

GeViScope, re_porter interface - Visio-SESAME (Graphical Management Systems). 
Now also available for G-Scope (G-Core).

Administration of video recording devices via IP-networks

The software option “Visio-SESAME” is able to communicate with video recording devices. Due to the interface developed for GEUTEBRÜCK GeViScope/re_porter it is possible to carry out most of the video surveillance functionalities from each Micro-Sesame Station

Functionalities:

• Live viewing
• Start of recording
• Receiving of event notification
• Event start
• Dome control
• Display of recorded videos
• With the integration of GeViScope/re_porter video functionalities can be done directly from the same graphical Micro-SESAME station, which controls also other security systems like access control intrusion alarm, fire protection and more.
• Therefore the operation is very easy for the user.
• The interaction between the both systems can be automated (alarm or event actions). A fast and efficient process therefore is guaranteed.
• Reference list of facilities equipped with TIL/GEUTEBRÜCK
• Port o Marseille, Prefecture of Guadeloupe, Administration of the Department Puy der Dome at Clermont-Ferrand in France, Mexox (AREVA), CAF of Pointe-a-Pitre, The Post of Pointe-a-Pitre

• Specifier Text
  GeViScope, re_porter interface -
  Visio-SESAME (Graphical Management Systems)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the TIL Technologies system Visio-SESAME.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Video from Geviscope was integrated in our automation system.

GeViScope, re_porter, MultiScope III Interface - Wincor-Nixdorf (automated teller machines)

Functionalities:

• Serial connection of ATMs on Multicom

• Specifier Text
  GeViScope, re_porter, MultiScope III Interface -
  Wincor-Nixdorf (automated teller machines)
  
  Interface software for data exchange
  between the GEUTEBRÜCK
  picture recording systems GeViScope, re_porter,
  MultiScope III and Wincor-Nixdorf automated
  teller machines.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

GeViScope, GeViSoft, MultiScope III Interface - WinGuard Advancis (house & building system)

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• PTZ control (Pan-Tilt-Zoom)
• Integration of alarms

• Specifier Text
  GeViScope, GeViSoft, MultiScope III Interface -
  WinGuard Advancis (house & building system)
  
  Interface software for data exchange
  between the GEUTEBRÜCK video system platform
  GeViScope, picture recording system MultiScope III
  or the video management system GeViSoft and
  the Advancis house & building management
  system WinGuard.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection
• Télécharger le fichier (GIF, 345 KB)

G-Core Interface - WinGuard Advancis (house & building system) 

Functionalities:

• Full integration of the display (viewer) of live and stored video sequences of the GEUTEBRÜCK system in you own user interface.
• External event and alarm control of the GEUTEBRÜCK system using predefined control commands (“actions”).
• Event and alarm control by the GEUTEBRÜCK system using predefined control commands (“actions”).
• PTZ control (Pan-Tilt-Zoom)
• Integration of alarms

GeViScope, re_porter, GeViSoft Interface - WINMAG (Honeywell Security Group Novar GmbH)

Functionalities:

• Matrix control, camera selection, screen selection
• Periphery control, pan, tilt, zoom, etc.
• Display of live and recorded video (related to alarms from WINMAG) completely integrated into the WINMAG GUI
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria

• Specifier Text
  GeViScope, re_porter, GeViSoft Interface -
  WINMAG (Honeywell Security Group Novar GmbH)
  
  Interface software for data exchange between
  the GEUTEBRÜCK picture recording systems
  GeViScope, re_porter, GeViSoft and the
  Honeywell Security Group Novar GmbH system
  WINMAG.
  
  If required, please check the functional
  scope to be realized with our technical sales
  support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

G-Core Interface - WINMAG (Honeywell Security Group Novar GmbH) 

Functionalities:

• Matrix control, camera selection, screen selection
• Periphery control, pan, tilt, zoom, etc.
• Display of live and recorded video (related to alarms from WINMAG) completely integrated into the WINMAG GUI
• Search in the recorded video sequences of the GEUTEBRÜCK system using date and time as criteria

Securitymanagement system

This integration to our G-Core system was invented by the company Schille. For further information about this integration please get in contact with the Schille sales partner.

The integration of STENTOFON AlphaCom with GEUTEBRÜCK GeViScope enables video stream routing under control of commands issued by AlphaCom.

All commands (actions) which GeViScope recognises through its TACI interface module can be issued by AlphaCom, where the commands to connect cameras to monitors or clear the monitor will be the most widely used by the interface.

This will allow cameras to be connected on call and call request events, including changes to the viewed camera when the guard scrolls through the call request queue on the intercom station.

• Specifier Text
  GeViScope, re_porter interface -
  STENTOFON AlphaCom (communication platform)
  
  Interface software for data exchange
  between the GEUTEBRÜCK picture
  recording systems GeViScope, re_porter
  and the Zenitel system STENTOFON.
  
  If required, please check the functional
  scope to be realized with our technical
  sales support.
  
  Turnkey delivery and installation or
  turnkey assembly and connection

Integration with bar code scanners.